China Coal DDZ35/80 Belt Break Trap
Broken Belt Capture Machine Medium Coal Capture Machine Affordable Capture Machine Broken Belt Capture Machine Quote
The medium coal belt breaking trap is mainly suitable for belt conveyors that are transported upwards. The belt breaking trap is especially suitable for large inclination, heavy load, long distance uphill ordinary or strong belt conveyor.
The working principle of the belt break arrester:
◆ The belt breaking trap is used as an idler under normal circumstances, when the belt is broken or the backstop fails, it can quickly catch the heavy and empty tape that suddenly slides down after the belt of the belt is broken or out of control, until it is stuck, so as to avoid the impact of the belt slippage, the product has the function of anti-deviation, and can also be used as a cassette.
◆ The belt breaking trap is mainly suitable for belt conveyors that are transported upwards. It is especially suitable for large inclination, heavy load, long distance uphill ordinary or strong belt conveyor.
Technical parameters of China Coal Broken Belt Catcher:
1. The width of the tape ≥500mm.
2. The inclination angle of upward running > 6 degrees.
3. Rack form: fixed, disassembled, and dropped.
4. The groove angle of the drag roller < 60 degrees. 5. The maximum braking width on one side is 140mm. 6. Customized power 2300Kg 7. The destruction load of the catcher > 3500Kg
8. The maximum sliding distance is 3000mm
◆ Features of the belt break trap:
1. Split structure, flexible and convenient installation.
2. The tape breaking signal is taken from the upper tape, which is accurate and reliable to avoid misoperation.
3. Adopt the layout along the line to overcome the disadvantages of random change of the break point.
4. The contact trigger mode with the tape is adopted, and the action is sensitive and reliable.
5. Meet the random or regular test under the continuous belt to ensure the long-term operation of the product and the safety and reliability of the work.
Quantity selection: should be determined according to the user's belt conveyor parameters, through calculation, such as in the user's belt conveyor parameters can not be provided, can refer to the following table to select, adjust convenient, fast, sensitive action.
How the Lower Belt Breakage Catcher (PDBX) works:
When the belt conveyor is working normally, the DDZ lower belt breaking trap is used as an idler, once the belt is broken, the friction roller installed under the upper belt is reversed and the connecting rod mechanism is driven by the friction roller to quickly turn the eccentric roller downward. Since the eccentric roller runs in the same direction as the belt, the gap between the lower idler roller and the eccentric roller is gradually reduced, and the tape is finally captured. At the same time as the action of the lower belt catcher, the distress reporting device sends a signal and quickly sends out a belt breaking alarm. Average spacing arranged along the line of the lower fracture belt catcher (m)
Note: The number of installation of the lower belt catcher is not less than 2 groups
Contact: Zong Guangsheng 18553713828 WeChat: 18553713828 Tel: 0537-3150156 QQ: 1953837525
Company address: No. 11, Kaiyuan Road, High-tech Zone, Jining City, Shandong Province