Medium coal belt conveyor with belt breaking trap
Belt Break Belt Capture Broken Belt Capture Machine Function Model Professional supply of belt breaking catcher
Performance characteristics of China Coal DDZ wedge belt breaking trap
1. Wedge self-locking brake belt, no external power is required
The sliding force generated after the belt is broken is used as the braking driving force, so that the left and right wedge-shaped brake blocks automatically lock the sliding belt to brake without external power.
2. When braking, the brake block is in contact with the belt surface, and the braking surface is large and does not hurt the belt
When the belt is braked, the belt is clamped between the upper brake block and the wedge-shaped brake block, and the belt is in contact with the belt surface, and the braking surface is large, which will not cause damage to the belt. During normal operation, the belt is not in contact with the wedge-shaped brake block, that is, the brake block is operated in non-contact mode.
3. The upper brake block can swing, open, and can be adjusted up and down
When the belt is in normal operation, the left and right upper brake blocks can be opened to both sides of the belt, which is longitudinally parallel to the belt to avoid hindering coal transportation. When moving, after the intermediate trigger roller is triggered, it will be automatically unlocked and automatically released.
4. The trigger roller is in contact with the belt, when the belt is in normal operation, it rotates with the belt, and when the belt is broken, the trigger roller rotates at a certain angle and then stops, and the trigger action is fast.
5. According to the carrying capacity, adjust the bolts above the upper brake block, set the length of the upper brake block extension belt, adjust the bolt group on the fixed beam of the upper brake block according to the thickness of the belt, and set the spacing between the upper brake block and the wedge-shaped brake block.
6. An anti-deviation vertical roller is installed on the left and right sides of the belt breaking trap, which can play a role in preventing deviation.
7. When needed, the belt breaking arrester can be used as a backstop and a cassette. When in use, the limiting device of the intermediate trigger roller is opened, and the belt is sandwiched between the upper and lower brake blocks, and the gravity of the belt prompts the brake block action to jam the belt.
8. The integral mounting bracket has high strength and easy installation. The integral mounting bracket is adopted, and its strength sub-split bracket is greatly increased, and when installed, it is bolted to the middle frame of the belt conveyor between the two groups of trough idlers.
9. The important rotating shaft sleeve is processed with stainless steel, which can effectively prevent corrosion.
10. According to the user's requirements, the belt breakage alarm device can be equipped.
China Coal Sales Manager: Zong Guangsheng
Sales Hotline: 18553713828 Tel: 0537-3150156
QQ: 1953837525
The product pictures are for reference only, please refer to the actual product!
QQ talk
Send inquiry
