KSP-5 wet concrete spraying machine

Product introduction of KSP-5 wet concrete spraying machine

KSP-5 concrete spraying machine (wet spraying machine) is mainly used in railway (road) tunnel engineering. The equipment is easy to operate, low dust, less rebound, protects the environment, and improves the quality of the spraying layer, the special vibrating hopper enables the concrete to enter the batching system smoothly, the standard metering pump can accurately add the quick-setting agent, the use of low-pressure and low-speed vortex air flow transportation, the working principle of close-range jetting, to overcome the problems of pipe blockage, pulse, segregation and so on. Make the jet flow uniform and stable. Improve the quality of the spray layer.

KSP-5 wet concrete spraying machine structure

KSP-5 wet concrete spraying machine is mainly composed of drive motor, reducer, rotor body assembly, sealing plate, hopper seat, sprinkler, vibrating hopper, taper sleeve, compression mechanism, quick-setting agent conveying system, air path system and electronic control device and other components.

Technical characteristics of KSP-5 wet concrete spraying machine

(1) Straight-through rotor type non-adhesive material cavity, smooth discharge, efficient and time-saving.

(2) Four-point elastic compensation compression, good sealing effect, less dust next to the machine, and long service life of wearing parts.

(3) Low-pressure and high-speed vortex airflow transportation is used to overcome the problems of bonding, pipe blockage and pulse detachment in material transportation, and the material flow is uniform, continuous and stable.

(4) New nozzle, discharging elbow device, improve spraying effect, less rebound, high spray quality.

KSP-5 wet concrete spraying machine parameters

The machine production capacity is 5.5m3/h

The concrete mix ratio is 1:4-5C/A

The water-cement ratio of the materials used ≤ 0.4

The maximum conveying distance is 200m level

The maximum aggregate particle size is Φ20mm

The inner diameter of the conveying pipe is Φ50mm

The working wind pressure is 0.2-0.4Mpa

The air consumption is 7-8m3/min

The loading height is 1.1m

The motor power is 5.5KW

Voltage level 380V

The weight of the whole machine is 600kg

Dimensions (length×width×height) 2100*900*1280 (mm).

Shandong China Coal Industry and Mineral Materials Group Co., Ltd

Contact: Fan Yaping

Mobile: 18660761529 QQ: 2710561246

Address: No. 11, Kaiyuan Road, High-tech Zone, Jining City, Shandong Province